ST420-4-20 mA Shaft Speed Sensors-Electro sensor Vietnam-Đại lý Ans Vietnam

ANS Vietnam hân hạnh giới thiệu đến quí khách sản phẩm mà chúng tôi là đại lý phân phối chính thức:

Hãng: Electro sensor
Mã hàng: ST420

St420.png

4-20 mA Shaft Speed Sensors

Features
• 2-wire, loop-powered 4-20 mA analog output
• No user calibration: works right out of the box
• Works with shaft-mounted pulser targets (disc/wrap)
• Rugged stainless steel M18x1 housing
• Reverse-wiring protected
• UL listed, Intrinsically Safe (IS)
• Class I, Div I (C, D) Class II, Div I (E, F, G) when
used with an IS barrier.

The patented ST420 detects passing magnets of a shaft-mounted pulser disc or wrap and outputs a smooth, continuous 4-20 mA analog signal in direct proportion to shaft rotation speed.

Custom speed and pulser disc/wrap PPR ST420 models are available upon request.

Optional EZ-18mm Easy Sensor Mount
EZ-18mm Easy Mounting for Speed Sensors

 

 

 

 

 

Features
• 
 Mounts directly to the tapped shaft
•  Can be used with optional Mounting Magnet  if the shaft is not tapped
•  Pulser disc is included with Optional EZ-18mm
•  EZ-18mm is for Series 18, ST420 Series, and  SpeedTalker Sensors

Model Part Number
ST420 low speed 0.2 – 200 RPM, 8 Pulses Per Revolution (PPR) 800-001620
ST420 high speed 0.2 – 2,000 RPM, 8 Pulses Per Revolution (PPR) 800-001621

Option Part Number
EZ-18mm Mounting Bracket Assembly 810-000042
MM-1.25 Mounting Magnet (Must be used with EZ-18mm) 810-000060

Hãy liên hệ với chúng tôi để được hỗ trợ giá tốt nhất!!!

Hot line: 0916551124  (@ Duyên)
[E]: ngocduyen.ans@ansvietnam.com
Sky: duyen_ans
Website: tudonghoaans.com

Blogger | Sites | WordPress

ANS VIETNAM là một trong những Công ty hàng đầu chuyên cung cấp máy móc, thiết bị cho ngành công nghiệp, điện công nghiệp và điều khiển tự động của các hãng nổi tiếng :Celduc Vietnamsterilair vietnamVaisala VietnamBalluff VietnamMetrix VietnamKofloc VietnamMeister VietnamAGR VietnamElectro Sensor VietnamMts Sensor VietnamHans Schmidt VietnamFMS VietnamIMO VietnamSanko Denshi VietnamTakuwa VietnamTowa Seiden VietnamPCB Vietnam,…

931 XP-Shaft Speed Sensors-Electro sensor Vietnam-Đại lý Ans Vietnam

 

ANS Vietnam hân hạnh giới thiệu đến quí khách sản phẩm mà chúng tôi là đại lý phân phối chính thức:

931.png

Hãng: Electro sensor 

Model: 931 XP Hall Effect- Shaft Speed Sensors

Explosion Proof Hall Effect Sensor

  • Square-wave pulse frequency output, NPN open-collector
  • Zero speed operation with no signal loss
  • 5-24 VDC powered
  • 1/2″ NPT conduit port
  • Non-contact, large gap distance sensing
  • Works with magnetic Electro-Sensors pulser discs / wraps
  • 931 XP – UL Listed Class I, Div I (C, D) Class II, Div I (E, F, G) Class III

The 931 XP is mounted in a cast aluminum enclosure and is supplied with a mounting bracket and 10 feet of 3-conductor shielded cable. The conduit opening is 1/2 inch NPT.

  • Class I, Div I (C, D) Class II, Div I (E, F, G) Class III
  • XLB-1 enclosure

931 XP Hall Effect speed sensors use magnet-sensing Hall Effect IC’s to produce a digital pulse signal to interface with speed switches, tachometers, counters, signal conditioners, or PLC’s. Hall Effect sensors provide true zero speed operation with square-wave output and immunity to electrical noise.

A pulser disc or split collar pulser wrap with embedded magnets is mounted on the monitored shaft. As the shaft rotates, the magnets pass in front of the sensor causing the sensor to switch high and low, thus producing a digital pulse output. The sensors provide a digital square wave signal with a 50/50 duty cycle when used with pulse generators that have evenly spaced magnets of alternating polarities, such as Electro-Sensors Model 255 Pulser Disc.

Model Part Number
931 XP, 10′ PVC Cable – Standard 775-093100
931 XP, 10′ Teflon Cable 775-093101
931 XP, 50′ PVC Cable 775-093105
931 XP, 100′ PVC Cable 775-093110

System Options Part Number
Standard 255 Nylon Pulser Disc, 4″ Diameter, 16 Magnets 700-000200

Other Options Part Number
U-Bolt for 931 XP/933 XP 258-000300
931 XP Bracket Mounting XLB-1 260-000900
931 XP/933 XP Disc Guard 725-005400

Hãy liên hệ với chúng tôi để được hỗ trợ giá tốt nhất!!!

Hot line: 0916551124  (@ Duyên)
[E]: ngocduyen.ans@ansvietnam.com
Sky: duyen_ans
Website: tudonghoaans.com

Blogger | Sites | WordPress

ANS VIETNAM là một trong những Công ty hàng đầu chuyên cung cấp máy móc, thiết bị cho ngành công nghiệp, điện công nghiệp và điều khiển tự động của các hãng nổi tiếng :Celduc Vietnamsterilair vietnamVaisala VietnamBalluff VietnamMetrix VietnamKofloc VietnamMeister VietnamAGR VietnamElectro Sensor VietnamMts Sensor VietnamHans Schmidt VietnamFMS VietnamIMO VietnamSanko Denshi VietnamTakuwa VietnamTowa Seiden VietnamPCB Vietnam,…

 

775-000811, 917A, Analog, Shaft Speed Sensors, Electro sensor Vietnam, Đại lý Ans Vietnam

ANS Vietnam hân hạnh giới thiệu đến quí khách sản phẩm mà chúng tôi là đại lý phân phối chính thức:

916

Hãng: Electro sensor

Model: 916A/917A Analog Shaft Speed Sensors

Analog Shaft Speed Sensors

Features

  • Large gap non-contact sensing
  • Signal transmission up to 1,500 feet
  • Easy to install – no maintenance
  • Rugged and reliable

916A Sensors have a 3/4″ threaded aluminum body, are supplied with a mounting bracket and jam nuts, and are recommended for use with Pulser Discs and Split Collar Pulser Wraps.

917A Sensors are mounted in a rugged cast aluminum enclosure. 917A sensors are also supplied with a mounting bracket and are recommended for use with Pulser Discs and Split Collar Pulser Wraps.

FOR 916A Only – Optional EZ-3/4in Easy Sensor Mount 
(see EZ-3/4in page for more details)

Features
• 
 Mounts directly to the tapped shaft
•  Can be used with optional Mounting Magnet  if the shaft is not tapped
•  Pulser disc is included (8 PPR)
•  EZ-3/4in is for the 906, 916A, and 932 sensors

2018-02-27_07-55_330.jpg                 2018-02-27_07-56_494.jpg

                   EZ-3/4in & 906                               EZ-3/4in, 906, and MM-1.25 Mounting Magnet

 

Ordering
Model Part Number
916A, Triangle Bracket, 10′ PVC Cable –Standard 775-000801
916A, Triangle Bracket, 50′ PVC Cable 775-000802
916A, Triangle Bracket, 100′ PVC Cable 775-000803
916A, Triangle Bracket, 10′ Teflon Cable 775-000804
916A, Triangle Bracket, 50′ Teflon Cable 775-000805
916A, Triangle Bracket, 100′ Teflon Cable 775-000806
916A, Square Bracket, 10′ PVC Cable 775-000807
916A, Square Bracket, 50′ PVC Cable 775-000808
916A, Square Bracket, 100′ PVC Cable 775-000809
916A SS, Stainless Steel, 10′ PVC Cable 775-000810

917A, 10′ PVC Cable – Standard 775-000811
917A, 50′ PVC Cable 775-000812
917A, 100′ PVC Cable 775-000813

System Options Part Number
Standard 255 Nylon Pulser Disc,
4″ Diameter, 16 Magnets 700-000200

Other Options Part Number
EZ-3/4in Bracket Assembly (916A) 810-000040
EZ-100 Bracket Assembly (917A) 810-000001
MM-1.25 Mounting Magnet (must use
EZ-3/4in Bracket Assembly) 810-000060
MM-2.00 Mounting Magnet (must use
EZ-100 Bracket Assembly) 810-000050
Standard Disc Guard 725-005300
EZ-Mount Disc Guard 725-005200
EZ-Mount Lower Disc Guard 725-005201

 

Hãy liên hệ với chúng tôi để được hỗ trợ giá tốt nhất!!!

Hot line: 0916551124  (@ Duyên)
[E]: ngocduyen.ans@ansvietnam.com
Sky: duyen_ans
Website: tudonghoaans.com

Blogger | Sites | WordPress

ANS VIETNAM là một trong những Công ty hàng đầu chuyên cung cấp máy móc, thiết bị cho ngành công nghiệp, điện công nghiệp và điều khiển tự động của các hãng nổi tiếng :Celduc Vietnamsterilair vietnamVaisala VietnamBalluff VietnamMetrix VietnamKofloc VietnamMeister VietnamAGR VietnamElectro Sensor VietnamMts Sensor VietnamHans Schmidt VietnamFMS VietnamIMO VietnamSanko Denshi VietnamTakuwa VietnamTowa Seiden VietnamPCB Vietnam,…

775-110003, 1101 Hall Effect Sensor-Cảm biến tốc độ-Electro sensor vietnam-Đại lý ANS Vietnam

ANS Vietnam hân hạnh giới thiệu đến quí khách sản phẩm mà chúng tôi là đại lý phân phối chính thức:

Hãng: Electro sensor 

Model: 1101 Hall Effect Sensor 

1101.png

Stainless Steel Hall Effect

Features

  •   NPN open collector, square-wave output
  •   Zero speed operation with no signal loss
  •   Non-contact, large gap distance sensing
  •   Signal transmits up to 1,500 ft
  •   Simple to install and set up
  •   Powered by 5-24 VDC

The 1101 Hall Effect sensor has a non-threaded stainless steel body, is supplied with a mounting bracket and 10 ft of 3-conductor shielded cable. It is commonly used with pulser discs or 60 pulses/rev magnet wheels.

These speed sensors use magnet-sensing Hall Effect IC’s to produce a digital pulse signal to interface with speed switches, tachometers, counters, signal conditioners, or PLC’s. Hall Effect sensors provide true zero speed operation with square-wave output and immunity to electrical noise.

A pulser disc or split collar pulser wrap with embedded magnets is mounted on the monitored shaft. As the shaft rotates, the magnets pass in front of the sensor causing the sensor to switch high and low, thus producing a digital pulse output. The sensors provide a digital square wave signal with a 50/50 duty cycle when used with pulse generators that have evenly spaced magnets of alternating polarities, such as Electro-Sensors Model 255 Pulser Disc. The recommended gap distance between the sensor and pulse generator is 1/4 inch +/- 1/8 inch. The gap flexibility makes the sensors tolerant of vibration, shaft run-out, misalignment, and industrial environments.

Model Part Number
1101, 18-36 V, Hi Temp, 10′ PVC Cable,
w/ Bracket 775-110001
1101RK, 3.75″, 10′ PVC Cable, w/o Bracket
(Used on Ring Kits) 775-110003
1101, 2.0″, 10′ PVC Cable, w/o Bracket 775-110100
1101, 2.0″, 50′ PVC Cable, w/ Bracket 775-110101
1101, 2.0″, 50′ PVC Cable, w/o Bracket 775-110105
1101, 2.0″, 50′ PVC Cable, w/ Bracket 775-110106
1101, 2.0″, 100′ PVC Cable, w/o Bracket 775-110110
1101, 2.0″,100′ PVC Cable, w/Bracket 775-110111
1101, 2.0″, 10′ Teflon Cable w/o Bracket 775-110114
1101, 2.0″,10′ Teflon Cable w/ Bracket 775-110121

System Options Part Number
Standard 255 Nylon Pulser Disc,
4″ Diameter, 16 Magnets 700-000200

Other Options Part Number
1100 Sensor Series Mounting Bracket 725-004000

Hãy liên hệ với chúng tôi để được hỗ trợ giá tốt nhất!!!

Hot line: 0916551124  (@ Duyên)
[E]: ngocduyen.ans@ansvietnam.com
Sky: duyen_ans
Website: tudonghoaans.com

Blogger | Sites | WordPress

ANS VIETNAM là một trong những Công ty hàng đầu chuyên cung cấp máy móc, thiết bị cho ngành công nghiệp, điện công nghiệp và điều khiển tự động của các hãng nổi tiếng :Celduc Vietnamsterilair vietnamVaisala VietnamBalluff VietnamMetrix VietnamKofloc VietnamMeister VietnamAGR VietnamElectro Sensor VietnamMts Sensor VietnamHans Schmidt VietnamFMS VietnamIMO VietnamSanko Denshi VietnamTakuwa VietnamTowa Seiden VietnamPCB Vietnam,…

ST420-DI low speed 0.2 – 200 RPM, 8 Pulses Per Revolution (PPR) 800-001920

ANS Vietnam hân hạnh giới thiệu đến quí khách sản phẩm mà chúng tôi là đại lý phân phối chính thức:

ST420LT.png

Hãng: Electro sensor

Model: ST420-LT / ST420-DI

4-20 mA Shaft Speed Sensors

Features
• 2-wire, loop-powered 4-20 mA analog output
• No user calibration: works right out of the box
• Works with shaft-mounted pulser targets (disc/wrap)
• Rugged stainless steel M18x1 housing with integral conduit attachment
• Reverse-wiring protected
• FM approved, Dust-Ignition-Proof Class II, Div I (E, F, G)
• NEMA 4X, IP65

ST420-LT             Integral ½ in flexible liquid-tight conduit fitting
ST420-DI              Integral ½ NPT female conduit port

The patented ST420-LT and ST420-DI detect passing magnets of a shaft-mounted pulser disc or wrap and output a smooth, continuous 4-20 mA analog signal in direct proportion to shaft rotation speed.

Custom speed and pulser disc/wrap PPR ST420-LT and ST420-DI models are available upon request.

Optional EZ-18mm Easy Sensor Mount
(see EZ-18mm page for more details)

  Features
•  Mounts directly to the tapped shaft
•  Can be used with optional
Mounting Magnet  if the shaft is not tapped
•  Pulser disc is included with optional EZ-18mm
•  EZ-18mm is for Series 18, ST420
Series, and SpeedTalker Sensors

 

Model Part Number
ST420-DI low speed 0.2 – 200 RPM,
8 Pulses Per Revolution (PPR) 800-001920
ST420-DI high speed 0.2 – 2,000 RPM,
8 Pulses Per Revolution (PPR) 800-001921
ST420-LT low speed 0.2 – 200 RPM,
8 Pulses Per Revolution (PPR) 800-004120
ST420-LT high speed 0.2 – 2,000 RPM,
8 Pulses Per Revolution (PPR) 800-004121

Option Part Number
EZ-18mm Mounting Bracket Assembly 810-000042
MM-1.25 Mounting Magnet (Must be
used with EZ-18mm) 810-000060

Option Part Number
258 Pulser Disc, Nylon, 4″ Diameter,
8 Magnets 700-000209

 

Hãy liên hệ với chúng tôi để được hỗ trợ giá tốt nhất!!!

Hot line: 0916551124  (@ Duyên)
[E]: ngocduyen.ans@ansvietnam.com
Sky: duyen_ans
Website: tudonghoaans.com

Blogger | Sites | WordPress

ANS VIETNAM là một trong những Công ty hàng đầu chuyên cung cấp máy móc, thiết bị cho ngành công nghiệp, điện công nghiệp và điều khiển tự động của các hãng nổi tiếng :Celduc Vietnamsterilair vietnamVaisala VietnamBalluff VietnamMetrix VietnamKofloc VietnamMeister VietnamAGR VietnamElectro Sensor VietnamMts Sensor VietnamHans Schmidt VietnamFMS VietnamIMO VietnamSanko Denshi VietnamTakuwa VietnamTowa Seiden VietnamPCB Vietnam,…

775-000602, 907 XP, 10′ Teflon Cable, Speed Sensor, Electro sensor Vietnam, Đại lý Ans Vietnam

ANS Vietnam hân hạnh giới thiệu đến quí khách sản phẩm mà chúng tôi là đại lý phân phối chính thức:

Hãng: Electro sensor

Model: 907 XP 

907.png

Explosion Proof Shaft Speed Sensor – Hall Effect

Features

  • Square-wave pulse frequency output, NPN open-collector
  • Zero speed operation with no signal loss
  • 5-24 VDC powered
  • Non-contact, large gap distance sensing
  • Bidirectional (quadrature) option
  • Works with Electro-Sensors magnetic pulser discs/wraps
  • Optional Mounting Bracket Assembly and Mounting Magnet
  • Class I, Div I (D) Class II, Div I (E, F, G) Class III
  • XLB-3 enclosure

907 XP sensors are used in applications requiring hazardous location ratings, or in applications where the sensor may be subject to abuse. It has a 1-inch NPT conduit opening for wiring, terminal strip for wiring, and is provided with a mounting bracket and 10 ft of cable. The quadrature (bidirectional) option has two sensors and is designed for applications requiring both speed and direction information. Specify vertical alignment when the magnets will pass vertically in front of the sensor face, and horizontal alignment when the magnets will pass horizontally in front of the sensor face..

These speed sensors use magnet-sensing Hall Effect IC’s to produce a digital pulse signal to interface with speed switches, tachometers, counters, signal conditioners, or PLC’s. Hall Effect sensors provide true zero speed operation with square-wave output and immunity to electrical noise.

A pulse disc or split collar pulser wrap with embedded magnets is mounted on the monitored shaft. As the shaft rotates, the magnets pass in front of the sensor causing the sensor to switch high and low, thus producing a digital pulse output. The sensors provide a digital square wave signal with a 50/50 duty cycle when used with pulse generators that have evenly spaced magnets of alternating polarities, such as Electro-Sensors Model 255 Pulser Disc. The recommended gap distance between the sensor and pulse generator is 1/4 inch +/- 1/8 inch. The gap flexibility makes the sensors tolerant of vibration, shaft run-out, misalignment, and industrial environments.

optional Mounting Magnet: MM-2.00 (For 907 XP Only)
(See EZ Mounting Magnets Page for More Information)

  • No Drilling or Tapping Required!
  • MUST be used with the EZ-100 Mounting Bracket

Speed Switch Easy Mounting MagnetEasy Mounting Magnet and Speed Sensor

Ordering
Model Part Number
907 XP, 10′ PVC Cable – Standard 775-000600
907 XP-S, 10′ PVC Cable 775-000601
907 XP, 10′ Teflon Cable 775-000602
907 XP Vert, Quadrature, 10′ PVC Cable 775-006100
907 XP Horiz, Quadrature, 10′ PVC Cable 775-006101
907 XP Vert, Quadrature, 10′ Teflon Cable 775-006102
907 XP Vert, Quadrature, 50′ PVC Cable 775-006105
907 XP Vert, Quadrature, 100′ PVC Cable 775-006110

System Options Part Number
Standard 255 Nylon Pulser Disc,
4″ Diameter, 16 Magnets 700-000200

Other Options Part Number
EZ-100 Bracket Assembly 810-000001
MM-2.00 Mounting Magnet (must use
EZ-100 Bracket Assembly) 810-000050
Standard Disc Guard 725-005300
EZ-Mount Disc Guard 725-005200
EZ-Mount Lower Disc Guard 725-005201

Hãy liên hệ với chúng tôi để được hỗ trợ giá tốt nhất!!!

Hot line: 0916551124  (@ Duyên)
[E]: ngocduyen.ans@ansvietnam.com
Sky: duyen_ans
Website: tudonghoaans.com

Blogger | Sites | WordPress

ANS VIETNAM là một trong những Công ty hàng đầu chuyên cung cấp máy móc, thiết bị cho ngành công nghiệp, điện công nghiệp và điều khiển tự động của các hãng nổi tiếng :Celduc Vietnamsterilair vietnamVaisala VietnamBalluff VietnamMetrix VietnamKofloc VietnamMeister VietnamAGR VietnamElectro Sensor VietnamMts Sensor VietnamHans Schmidt VietnamFMS VietnamIMO VietnamSanko Denshi VietnamTakuwa VietnamTowa Seiden VietnamPCB Vietnam,…

DR1000-Digital Speed Switch-Electro sensor Vietnam

ANS Vietnam hân hạnh giới thiệu đến quí khách sản phẩm mà chúng tôi là đại lý phân phối chính thức:

Hãng: Electro sensor

Xuất xứ: USA
Model: DR1000

motrona

Digital Speed Switch

Features
• Works with remote/external pulse frequency output sensor
(NPN, PNP, or Mag Pick-up)
• DPDT relay output
• Under-speed setpoint adjustment from 0.5-5,000 rpm (at 8 PPR)
• Terminal blocks for easy wiring
• 115, 230 VAC (50-60 Hz) and 12, 24 VDC power options
• Rugged explosion proof / NEMA 4X housing
• UL Listed Class I, Div I (C, D) Class II, Div I (E, F, G)

The DR1000 speed switch is ideal for detecting unwanted slowdown or stoppage of process equipment and is commonly applied to drive trains, power driven components, crushers, exhaust fans, screw conveyors, tail pulleys on belt conveyors, and elevators.

The DR1000 features precise setpoint capability over a broad range of speeds starting at 0.5 rpm, making it ideal for super slow speed applications. The DR1000 monitors shaft speeds, detecting shaft slowdown with a 6.6% hysteresis. A DPDT control relay rated at 5 A at 30 VDC/120 VAC resistive, serves as the output.

Model Description Part Number
1-turn setpoint potentiometer
DR1000, 115 VAC – Standard 800-050101
DR1000, 230 VAC 800-050102
DR1000, 12 VDC 800-050103
DR1000, 24 VDC 800-050104
Model Description Part Number
25-turn setpoint potentiometer
DR1000, 115 VAC – Standard 800-050105
DR1000, 230 VAC 800-050106
DR1000, 12 VDC 800-050107
DR1000, 24 VDC 800-050108

System Options Part Number
906 Hall Effect Speed Sensor
907 XP Hall Effect Speed Sensor (Explosion Proof)
775-000500
775-000600
Standard 255 Nylon Pulser Disc, 4″ Diameter,
16 Magnets 700-000200

Accessories Part Number
EZ-100 Bracket Assembly (907 XP) 810-000001
MM-2.00 Mounting Magnet (must use w/EZ-100) 810-000060
EZ-3/4in Bracket Assembly (906) 810-000040
MM-1.25 Mounting Magnet (must use w/EZ-3/4in) 810-000060
Standard Disc Guard (for 4″ Discs) 725-005300
EZ-Mount Disc Guard (for 4″ Discs) 725-005200
EZ-Mount Lower Disc Guard (for 4″ Discs) 725-005201

 

Hãy liên hệ với chúng tôi để được hỗ trợ giá tốt nhất!!!

Hot line: 0916551124  (@ Duyên)
[E]: ngocduyen.ans@ansvietnam.com
Sky: duyen_ans
Website: tudonghoaans.com

Blogger | Sites | WordPress

ANS VIETNAM là một trong những Công ty hàng đầu chuyên cung cấp máy móc, thiết bị cho ngành công nghiệp, điện công nghiệp và điều khiển tự động của các hãng nổi tiếng :Celduc Vietnamsterilair vietnamVaisala VietnamBalluff VietnamMetrix VietnamKofloc VietnamMeister VietnamAGR VietnamElectro Sensor VietnamMts Sensor VietnamHans Schmidt VietnamFMS VietnamIMO VietnamSanko Denshi VietnamTakuwa VietnamTowa Seiden VietnamPCB Vietnam,…

 

#Electro #Electrosensor #electrosensorvietnam #đạilý #cảmbiếntốcđộ #cảmbiến #sensor #725-005201 #700-000200 #800-045000 #725-005300 #810-000001 #725-005200 #810-000050 #FB420 #725-005201 #725-005200 #725-005300 #810-000060 #810-000040 #810-000060 #810-000001 #800-050102 #800-050101 #800-050103 #800-050104 #800-050105 #800-050106 #800-050107 #800-050108  #DigitalSpeedSwitch